The EH-TD10 fulfills the need
for a powerful yet cost effective operator interface system in areas where
space and cost must be small. Display is a four line backlit LCD. Each line
can contain up to 20 characters. Each page can contain up to 32 lines, which
can be accessed by scrolling with the arrow keys. Brightness control is
provided to adjust the display for easy viewing under nearly any condition.
Display Variables
PLC internal variables can be shown on any of
the many display pages (limited only by memory size). The number of
variables that can be viewed at one time is limited only by the display
size. UniOP also provides scaling (linear conversion) of the displayed data.
The final value can then be shown in several useful formats including date,
time, decimal, bit, hexadecimal, floating point, and string. Data entry with
valid range verification is also available for each data type.
Data Entry
The integral keypad on the EH-TD10 series
offers 19 programmable keys and 9 user LEDs. Slide-in legends make it easy
to customize and document the operation of the numeric keys and the user
LEDs.
Security
An eight-level password protection scheme
protects critical system features from undesired access.
Alarms
The integral keypad on the EH-TD10 series
offers 19 programmable keys and 9 user LEDs. Slide-in legends make it easy
to customize and document the operation of the numeric keys and the user
LEDs.
Adaptability
Custom display screens are developed using
the UniOP Designer™ for Windows™ programming software. Your completed
project file can be downloaded to the display through the serial port and
permanently stored in Flash EPROM.
Keyboard Macro Editor
A feature that allows you to configure your
UniOP Keys to do a variety of functions locally in the UniOP. For example:
turning pages, setting attributes, setting LEDs, writing to the PLC, going
to the event list, uploading or downloading a recipe set and many more. This
can save many hours of ladder logic programming.
Recipes
This feature allows you to create a recipe
with up to 255 parameter sets for each page of the project file. UniOP has a
total of 16K reserved for recipe storage. You can upload or download a
parameter set from or to the PLC. Once a parameter set has been downloaded
to the PLC, the data contained within the parameter set can be modified.
UniNET Network
The UniNET network allows you to design
networks of varying configurations; from two panels with one PLC to multiple
panels with multiple PLCs. Data can be written to or retrieved from the PLCs
in many different locations at one time. The UniNET network creates a bridge
between UniOp panels which allows data to be shared by all PLCs in the
network, regardless of the type or manufacturer.
EH-TD10 Product Features
NEMA 4/12 compliant enclosure
CE approved
UniNET network capabilities
Keyboard Macro Editor
Recipe configuration
One RS-232 / RS-422 / RS-485 / 20mA current loop serial port, speeds up to
38,400 baud for direct PLC connection
One RS -232 port for PC or printer
communications
One auxiliary port for high speed bus network
communications
19 programmable keys
128 KB internal memory standard
Flash EPROM
Unlimited number of variables per page
1024 prioritized
alarms
Historical event list (last 256 events)
Eight-level password
protection
Print reports, alarm list, and event list to serial printer
Displays ASCII standard character set
Real time clock with battery
back-up
EH-TD10
Specs
Physical Dimensions
Cutout Width and Height Schematic
Cutout Depth 79mm
(3.11")
Front Panel Thickness (max.) 8 mm (0.31")
Face-plate Height 98
mm (3.85")
Face-plate Width 195 mm (7.68")
Weight 0.9kg (2.0 lb)
Environment
Operating Temperature 0 to 50o C (32 to
122o F)
Humidity 0 to 95% RH (non-condensing)
Power Requirements
250 mA maximum, 24 VDC
Display
Type Liquid Crystal
Size 4 lines x 20
characters/line
Character height 5.15mm (approx. 13/64 inch)
Keypad
Technology Tactile feedback ( tested 5M
times )
Warranty
All products are warranted for one year
against defects in material and workmanship. They may be returned in
good condition within thirty days for a full refund.